Reference:
M0003725
SOLAR CONTROLLER EPIPDB-COM 20A
EPEVER EPIPDB-COM-20 dual-battery solar charge controller, 20A, 12/24V auto recognition, for sealed, gel and flooded batteries.
The EPEVER EPIPDB-COM-20 is a dual-battery solar charge controller with a 20A rated charge current and automatic 12/24V system recognition. It shares the solar charging current between the two batteries according to a set percentage.
- Charges two batteries, sharing the current by an adjustable percentage
- Once one battery is full, more current is diverted to the other; the set split returns when battery 1 reaches low voltage
- If only one battery is detected, all charging current goes to it automatically
- Common-negative design: PV and battery negatives can be grounded together, separately or left ungrounded, while the grounding terminal on the housing must always be grounded
- Suitable for sealed, gel and flooded batteries
- 8-PIN RJ-45 communication port
| Nominal system voltage | 12/24 VDC, auto recognition |
|---|---|
| Rated charge current | 20A |
| Battery type | Sealed; Gel; Flooded |
| Equalize charging voltage | Sealed: 14.6V; Gel: no; Flooded: 14.8V |
| Boost charging voltage | Sealed: 14.4V; Gel: 14.2V; Flooded: 14.6V |
| Float charging voltage | Sealed/Gel/Flooded: 13.8V |
| Maximum solar voltage | 30V (12V system); 55V (24V system) |
| Battery voltage range | 8 ~ 15V |
| Boost time | 120 minutes |
| Self-consumption | 4mA at night; 10mA while charging |
| Communication port | 8-PIN RJ-45 |
| Temperature compensation | -5mV/℃/2V |
| Terminals | 4mm² |
| Ambient temperature | -35℃ ~ +55℃ |
| Note | Values measured in a 12V system; double them for a 24V system |
| Manufacturer code | EPIPDB-COM-20 |
| Brand | EPEVER |
|---|---|
| Reference | M0003725 |