Reference:
M0004272
CONTROLLER EPIPDB-COM 20A
EPEVER EPIPDB-COM-20 charge controller, 20A, for 12/24V solar systems with two batteries and adjustable charge sharing.
The EPEVER EPIPDB-COM-20 is a charge controller for solar systems with two batteries. It has a 20A rated charge current, automatically recognises 12V or 24V systems and charges the batteries in the percentage ratio you select.
- Adjustable charging percentage for each of the two batteries
- As soon as one battery is full, the extra current is diverted to the other; the selected ratio is restored when battery 1 reaches low voltage
- When only one battery is detected, it automatically receives all the charging current
- Common negative: PV and battery negatives may be grounded together or individually, or run ungrounded; the housing grounding terminal must be grounded
- Battery types: sealed, gel, flooded
- Communication via an 8-PIN RJ-45 port
| Nominal system voltage | 12/24 VDC, auto recognition |
|---|---|
| Rated charge current | 20A |
| Battery type | Sealed; Gel; Flooded |
| Equalize charging voltage | Sealed: 14.6V; Gel: no; Flooded: 14.8V |
| Boost charging voltage | Sealed: 14.4V; Gel: 14.2V; Flooded: 14.6V |
| Float charging voltage | Sealed/Gel/Flooded: 13.8V |
| Maximum solar voltage | 30V (12V system); 55V (24V system) |
| Battery voltage range | 8 ~ 15V |
| Boost time | 120 minutes |
| Self-consumption | 4mA at night; 10mA while charging |
| Communication port | 8-PIN RJ-45 |
| Temperature compensation | -5mV/℃/2V |
| Terminals | 4mm² |
| Ambient temperature | -35℃ ~ +55℃ |
| Note | Values measured in a 12V system; double them for a 24V system |
| Manufacturer code | EPIPDB-COM-20 |
| Brand | EPEVER |
|---|---|
| Reference | M0004272 |